Miêu tả tham số Bản_mẫu:Hộp_thông_tin_khu_bảo

Miêu tả tham số Bản_mẫu:Hộp_thông_tin_khu_bảo_tồn

This table describes all parameters which can be used in building infoboxes. Only the name parameter must be assigned a value.

Tên trường	Miêu tả
`name`	Required. The official name of the protected area. It will be displayed at the top of the infobox. In most cases this should be the same as the article name less any disambiguation. For example if the article title is Mount Washington (New Hampshire) then `name=Mount Washington`.
`alt_name`	If there is a common English name for the area use for the `name` parameter. This parameter can be used to display the name in the local language or for an alternate English name if it is commonly used. If you would like to italicize the text use wiki markup.
`iucn_category`	Strongly recommended. The IUCN category associated with the protected area. Valid values are Ia, Ib, II, III, IV, V, or VI. See IUCN Categories.
`photo`	The name of an image file to be displayed. No special formatting is needed.
`photo_width`	Can be used to change the display width the image. The default and maximum value is 284px. Images with a horizontal orientation (landscape mode) will generally display well at the default setting. An image with vertical orientation (portrait mode) may need to be adjusted to 180px or 220px. For example `photo_width=200` and not `photo_width=200px`.
`photo_alt`	Alt text for the photo, for visually impaired readers. See WP:ALT.
`photo_caption`	The caption which will appear below the image if one is required.
`map`	The name of the map to be displayed. See Map display methods.
`map_width`	Width to display the map image in pixels. The default and maximum is 284, but usually the map should be much smaller. For example: `map_width=200` (not `map_width=200px`). If a location map template is used the map size might be scaled automatically if no width is specified.
`map_alt`	Alternative text for the map image, see WP:ALT.
`map_caption`	Text to be displayed below the map image, if required.
`relief`	When the geographical coordinates method is used (see Map display methods), any non-blank value (`yes`, `1`, etc.) will cause the template to display a relief map image, where available. For additional information, see Bản mẫu:Bản đồ định vị#Tham số Relief.
`label`	A text message that will be displayed next to the marker. Works with `label_position` below.
`label_position`	Specifies the position of a label with respect to the marker. This is not functional when using the XY method for map display. It must be assigned a value or no label will not display. Valid values are `left`, `right`, `top` and `bottom`. See `label` above.
`mark`	The image to use for the marker. The default is Red pog.svg, unless `map=us locator blank.svg` in which case the default is Green pog.svg. See Bản mẫu:Infobox_map#Marks for more information.
`marker_size`	The display width of the marker image in pixels. The default value is 8.
`location`	The location of the protected area. Don't be too precise. County, state and country are good in the USA. If the area is within a city specify the city, state and country. If the area is in multiple counties just list the state and country. For areas in other countries adjust accordingly.
`nearest_city` `nearest_town`	Recommended if the area is not within a city or town. It could be a city with a major airport or a large gateway town where supplies and lodging are available. Use the most appropriate parameter.
`coordinates` `coords`	For the {{tọa độ}} template. The parameters `\|format=dms` and `\|display=inline,title` are recommended. Its coordinates can be used with the location map. (Unless a value for `type:` is provided, the template will automatically use `type:landmark`. See the {{tọa độ}} page for more info.)
`coords_ref`	Can be used with either coordinate display method above. Strongly recommended. Specify a citation for the coordinates using `<ref>...</ref>` tags.
`length`	Length of protected area, e.g., length of a trail. The {{Convert}} template should be used.
`length_km` `length_mi`	Length of protected area, with automatic conversion to metric/imperial units.
`width`	Width of protected area. Can be used with `\|length=` to describe rough shape. The {{Convert}} template should be used.
`width_km` `width_mi`	Width of protected area, with automatic conversion to metric/imperial units.
`area`	Area of the protected area. Usually in acres or square miles for US locations and hectares or square kilometres elsewhere. The {{Convert}} template should be used. Very small areas might be specified in square feet, square yards or square metres.
`area_km2` `area_sqmi` `area_acre` `area_ha`	Area of the protected area, with automatic conversion to metric/imperial units. Preferred to using bare `\|area=`
`area_ref`	Reference to reliable source for area value.
`elevation`	Elevation of the protected area.
`dimensions`	Dimensions of the protected area.
`designation`
`authorized` `created` `designated` `established`	The date the protected area was created. See below. Use {{Start date}}. For example, for Công viên Quốc gia Yosemite, use {{Start date\|1890\|10\|1}}.
`named_for`
`visitation_num`	The number of visitors in a recent year if known.
`visitation_year`	The year during which the number of visitors was counted.
`visitation_ref`	Used with the visitation parameters above. Highly recommended. Specify the a citation for the visitation data using `<ref>...</ref>` tags.
`governing_body` `administrator` `operator` `owner`	The agency or organization which controls or owns the protected area. See below.
`world_heritage_site`	The year the protected area was designated a World Heritage Site. Few areas have this designation. If the article uses {{Infobox World Heritage Site}} then this parameter should not be used.
`website` `url`	The full URL of the official website with no formatting. For example: `http://www.example.org/`. Use `\|website=` to display it with the label "Website" or use `\|url=` to display it with no label.
`child`	Set to "yes" if this infobox is embedded inside another infobox.
`embedded` `embedded1`	Another infobox to place within this infobox. It will show up at the bottom. It needs to have its "embed" or "child" parameter set to 1 or yes, as appropriate.
`embedded2`	A second embedded infobox.

Các tham số thay thế

A few cells allow alternate parameter names which can be used to generate an appropriate label. Editors should probably not be overly concerned with using the correct label unless using the wrong label would be a blatant error.

Ủy quyền	authorized

Tạo ra	created

Chỉ định	designated

Thành lập	established

Protected areas are often created as the result of a governmental procedure. For example, in the United States, national parks are established by an act of congress, National Monuments are usually created by presidential proclamation, and wilderness areas are designated by an act of congress. National Park Service Affiliated Areas are authorized.

authorized → Ủy quyềncreated → Tạo radesignated → Chỉ địnhestablished → Thành lập

Cơ quan quản lý	governing_body

Hành chính	administrator

Điều hành	operator

Chủ sở hữu	owner

Some areas are privately owned, and it might be inappropriate to use the label Governing body. For example, the Aleutian World War II National Historic Area is affiliated with the Cục Công viên Quốc gia but is owned by the Ounalashka Corporation. Chimney Rock National Historic Site is operated by Nebraska State Historical Society.

governing_body → Cơ quan quản lýadministrator → Hành chínhoperator → Điều hànhowner → Chủ sở hữu

Trang web	trang web

url

The website can be displayed with or without a label.

website → Trang weburl → (không có nhãn)

Thể loại IUCN

Depending on the value of the iucn_category parameter, one of the following banners will be displayed below the name. Valid values are Ia, Ib, II, III, IV, V and VI. For more information read the IUCN protected area categories article. If you cannot find the correct code in a reliable source, leave blank.

IUCN loại Ia (Khu bảo tồn thiên nhiên nghiêm ngặt)

IUCN loại Ib (Vùng hoang dã)

IUCN loại II (Vườn quốc gia)

IUCN loại III (Đài tưởng niệm thiên nhiên hoặc đặc điểm)

IUCN loại IV (Khu bảo tồn loài/sinh cảnh)

IUCN loại V (Khu bảo tồn cảnh quan đất liền/biển)

IUCN loại VI (Khu bảo tồn kết hợp sử dụng bền vững tài nguyên thiên nhiên)

Cú pháp tọa độ

Xem Bản mẫu:Infobox map/coordinate syntax.